24h Dispatch: 780-542-5331

PUMPING EQUIPMENT

Unit 324

Specs:

  • 2011 Kenworth T-800 Tri-Drive
  • 550 hp Engine
  • 2 speed gear box
  • Automatic transmission
  • Climate controlled operator cab
  • Data acquisition and treatment monitoring
  • Electronically and manually over pressure protection

Pumps

High pressure pumps

  • Main pump
    600 hp triplex
    70 mpa pressure rating
    Flow rate .05 to 1.25 m3 /min
  • Auxiliary pump
    100 hp triplex
    70 mpa pressure rating
    Flow rate .001 to .04 m3 /min

Low pressure pumps

  • Mission charge pump
  • Bowie load pump

Displacement / Mixing Tanks

  • 2 – 2,000 liter stainless steel tanks w/ paddle mixers
  • Stainless steel suction manifold system
  • 1502 X 50.8 mm hp treating line (40 m)
  • 1502 X 38.1 mm hp selective treating line (13 m)
  • 1502 Squeeze manifold
  • Suction / displacement / mixing hoses
    • 25.4 mm – 101.6 mm sizes available
  • All treating line and hoses 3rd party tested and certified.

Unit 320

Specs:

  • Western Star tractor
  • 500hp Detroit DD-15
  • 6 speed Allison auto
  • 2-speed axillary transmission
  • Two 4 m3 displacement tanks
  • Top drive mixing augers with recirculating mixing
  • T&E chemical loading pump
  • 4×6 mission charge pump
  • 600 Hp. Triplex pump 10k rating
  • 150 feet 1502 treating iron
  • Climate control operation cab
  • Data acquisition
  • Two-way radio communication
  • 1502 integral squeeze manifold
  • 75 feet of selective hose tested and certified yearly
  • Treating line safety restraints

All treating iron is tested and tagged as per safety requirements.
Pump rates vary from .04m3 /min to 1.2m3 min depending on pressure curve as set out by pump manufactures . (Pump is for intermittent service as per manufacture)

Unit 321

Specs:

  • 2014 Kenworth T800 Single axle
  • 370hp Cummings
  • 6 speed Allison automatic

Pumps

  • 375 hp Gardner Denver
  • 1.75 in plungers federate of 20litres/min- 220 litres/min
  • 10,000psi test
  • 9000 psi working
  • 100 feet 10,000 psi tested and certified hose
  • 80 feet 6000psi tested and certified hose
  • 40 feet two in suction hoses
  • 3×4 mission charge pump
  • T&E pump

Displacement Tank
5.9m3 three compartment

  • 1] 2.4m3
  • 2] 2.3m3
  • 3]1.2m3Climate control cab with data acquisition

Units 402 and 401

Cyclone Dry Product Mixer

 

Specs:

  • 2020 Ford F550 Flat Deck
  • 2021 24 foot Beavertail Tandem-Tandem Trailer
  • John Deere 125 hp engine
  • Dry powder mix hopper and jet
  • 4 pallet cartage
  • Mission Sand Master 3 X 5 Pump
  • 2m3 blend tank w/ hydraulic high-speed agitator

Units 322

Combo 10k Acid Simulation Unit

 

Specs:

  • 2023 Kenworth T800
  • Cummins 600hp
  • Allison automatic
  • 2 speed drop box.
  • Sleeper birth
  • Climate control cab
  • Video monitor passenger side

    Data acquisition

  • Emergency operational lighting
  • Radio
  • Passenger side emergency eyewash and shower
  • Full hydraulic system with cooler
  • 600 hp spm triplex pump 10K rating
  • Mission mix pump
  • Mission charge pump
  • T&E chemical pump
  • 15k steel treating iron certified and tested.
  • Dual 5k hose reels certified.
  • All wellhead and suction fittings
  • Mix tub.
  • FRP fiberglass 4m3 haul tank
  • Certified suction hoses

     

    This unit is 10k rated with treating iron and 5k rated with hose. Capable of mixing and pump chemicals, acids, and rock salt solutions. Also, able to haul up to 4m3 corrosive products.

SAFETY PROGRAM

A management-enforced safety program, safety awareness, and constant on-the-job training is what makes us Complyworks and ISN certified compliant.

Locations:

Drayton Valley  |  Calgary  |  Grande Prairie  |  Red Deer

Main Office:
6204 58 Ave
Drayton Valley, AB T7A 1S8

Call our Office/24HR Service line at:
(780) 542-5331

Have a question?

11 + 15 =

Our focus is to work closely with oil industry producers to reduce well operating costs while maximizing oil & gas production.